INTRODUCTION
PV ribbon is a hot-dip tinned copper conductor that collects current from photovoltaic cells and is the conductor that joins the individual solar cells and carries the current generated to the distribution system.
SPECIFICATION
| ITEM |
SPECIFICATION |
| Thickness (mm): |
0,080 – 0,500 ± 0,007 |
| Width (mm): |
0,300 – 6,000 ± 0,08 |
| Coatings (hot dipped) |
| Lead free (RoHS complied): |
Sn100; SnAgCu 96,5/3,0/0,5 |
| Leaded: |
SnPbAg 62/36/2; SnPb 63/37; SnPb 60/40 |
| Low temperature: |
SnBiAg 60/38/2 |
| Coating composition and thickness: |
4 – 50 µm ± 3 µm each side |
Base Material
| Cu-OF1 CW007A (Acc. EN13602) |
CDA 102 – Electrical Conductivity 101% – 103% IACS Resistivity ≤ 1,72 x 10-8 Ωm |
| Available Yield Strengths Rp0.2 (N/mm2) |
<140 |
| <90 |
| <70 |
| <50 |
| Elongation at fracture |
>25% |
| Camber (mm/m) |
<6 measured from the center of the spool |
